- [ 4 Professional Modes ] Camera detection,wireless signal detection,UG magnetic field signal detection,flashlight assisted lighting. Effectively detect wired and wireless cameras,GPS locators,etc.
- [ Wide frequency range ] The frequency detection range is 1Mhz-6.5Ghz(including 2G/3G/4G), and the detection range is 5cm-15m. Scanning speed 1500 times/second.
- [ Six-stage signal strength adjustment ] The detection range can be expanded or reduced by adjusting the signal strength.
- [ Easy operation ] Up/Down/Left/Right moving detection, scanning the surrounding environment if there is a strong point in the blink is the camera.
- [ Pen-sized, portable ] Subvert the traditional design,compact and delicate,business travel with no burden.
Product Description
The new generation of detectors uses high-quality, more accurate indication of signal source strength, and uses an efficient and convenient method to make all the products that invade your personal privacy nowhere to hide. The device can detect bugs, car trackers, hidden cameras and other products. At the same time, amplitude detection of electrical radiation sources can protect you and your family from electromagnetic radiation. The product takes the lead in using digital reception, which not only broadens the frequency of exploration, but also effectively avoids the interference of messy signals in life.
- Press the “Function toggle button” to turn on the three infrared lights on the back. Press the “signal strength adjustment button” to control the flashing speed of the red light. Each time you press the LED sensing key, the flashing frequency will be one step faster to control the flashing speed of the red light. Cycle adjustment can be adapted to the preferences of various people.
- Move the instrument up and down, left and right, and scan the surrounding environment with a laser, which is observed through a special filter for the machine accessories. If there is a camera lens in front of you, you will find a very strong bright spot flashing.
- Hold down the “On/Off mode button” for 3-5 seconds, after hearing the “beep” sound, release your finger and the blue indicator light will turn on, and the default detection wireless camera and wireless monitor mode will be turned on.
- If the blue light flashes and there is a voice prompt, it indicates that there is an emission source. The more blue light signals, the stronger the signal.
- Click the “Signal strength adjustment button” to adjust the sensitivity, the more blue lights, the higher the sensitivity, which can expand the search range.
- Cyclic adjustment: Adjust the “Signal strength adjustment button” to reduce the amount of blue lights, reduce the sensitivity, reduce the detection range, and finally find the emission source.
- You can also turn on the vibration mode, press the “On/Off mode button” to switch, and vibrate once.
GPS Tracker Detectors
- Press the “Function toggle button” to switch the green light, move the magnetic field induction probe close to the magnetic field source, the blue light of the main unit is on, and the buzzer alarm is about to work, indicating that there is a magnetic field or objects with strong magnetic near the magnetic probe, you can also turn on the vibration mode, press the “On/Off mode button” to switch, and vibrate once.
- Why is the silent sleep tracker not detected?
The commonly used sleep locator works once a day, and only works for 5-7 minutes at a time, so when the detector is detecting wireless signals, the locator may not send a signal.
The real-time locator generally sends a signal every 10 seconds. Please do not move back and forth during detection. It is best to fix it in one position for more than 5 minutes, and then change to another position to continue detection.
- Why does the detector terminal beep “DiDi”?
Please clear the surrounding environment, because the surrounding interference signal is too strong. Lower one notch.
- Why do the detectors near the windows of the house make such a loud noise?
The window is made of aluminum alloy, which forms a loop antenna, and the signal reception is particularly good.
- Why is the camera not detected?
It is possible that the camera is not working, it is possible that the camera is a wired camera, and the infrared light detection is used instead.
Parameters
| Size | 10.8×2.4×1.5 cm |
| Weight | 20g |
| Charging interface | Type-C |
| Work hours | 25 hours |
| Antenna gain | -56db |
| Power plug | DC 5V/1A |
| Battery | 3.7V/400mA |
| Sensitivity | 5 levels adjustable |
| Receiving frequency range | 1MHz – 6.5GHz |
| Signal detection range | 5cm-8m |
| Laser detection distance | 10cm-6m |
| Material | PC |