- 【Multiple users, Multiple Access Ways】 Support 10000 user capacity, support open the door for fingerprint identification, ID key cards, password options, come with 5PCS ID key fobs.
- 【Heavy-Duty Zinc Alloy Case】The access control keypad with strong zinc alloy electroplated anti-vandal and weatherproof. Epoxy to completely encapsulated, suitable for mounting either indoor or outdoor.
- 【Simple Set-ups and Easy Installation】The access control is multifunction standalone access controller, full programming from the keypad. Biometric fingerprinting technology. Working with DC12V power supply.
- 【Touch Password Panel Backlight】Access control keypad touch panel, 3-colour LEDs display the working status, blue backlight features keys. Stable and reliable with microcontroller design.
- 【High Security and Widely Used】Access control system able to deterring unauthorized personnel, Suitable for apartment, office, garage door/gate openers, access control, off-limit area, hotel locks, school campus access, identification, parking lot entry, etc.
Product Description
Fingerprint Password Access Control System
Compley weather resistant and waterproof, and able to work in almost any condition, this advanced metal fingerprint access control machine. support password ID card fingerprint unlock, easy to install, programmable, Protect personal property, businesses, or off-limit areas.
Important Notice:
Compatible EM standard card (Can’t support some encrypted cards,such as HID, Cobra, APCiK, etc)
Important Notice:
- It’s a wired keypad, for garage door/sliding door openers, please make sure your garage door/sliding door openers is compatible with the keypad.
- If your garage door/sliding door openers has a wired wall push button wiring port, supports run by wired wall push button, then it’s compatible with the keypad.
- The wired keypad can be used with most third party garage door/gate openers or swing/sliding door openers, whose control board accepts “normally open dry contact” signal, powered by the openers control board or powered by an external DC 12V-24V power supply control.
Specifications:
- Material: Metal
- User Capacity: 10000
- Frequency: 125khz
- Input Voltage :DC 12V-24V
- Card Reading Distance: ≤5cm/2.0in
- Quiescent Current: ≤35mA
- Operating Current: ≤100mA
- Operation Temperature: -45℃~60℃ / -49℉~140℉
- Size: Approx. 70 x 22 x 139mm/2.76 x 0.86 x 5.47in
- Important Notice: Compatible EM standard card (Can’t support some encrypted cards,such as HID, Cobra, APCiK, etc)
Features:
- Strong Zinc Alloy Electroplated anti-vandal case, IP68 Waterproof, high security.
- Support 10000 standard users, Supports ID Card, Password, Fingerprint unlock, can add user and delete user as your requirement.
- Designed with the new ARM core 32-bit microcontroller, it is powerful, stable and reliable, including card reader mode, all-in-one mode and many other functions.
- 125kHz ID Proximity ID token tag key keyfobs for access control.
- Full programming from the keypad, built-in proximity card reader, touch backlight keys.
- With lock relay output, Lock output current short circuit protection, Very low power consumption.
- Red, Yellow and Green LEDs display the working status. Secure / normal Mode, NO / NC output.
- Supports Home, Garage, Office, or Gate Use.
ID Keyfobs:
- Works as a regular 125KHz ID
- Card type: Standard EM card
- Chip: Tk4100
- Compatible with standard EM ID access devices or ID reader
- Contactless transmission of data and supply energy
- Card material: PVC
- Detection distance: 2-10mm
- Read only, not HID card, can not be programmed, not rewritable
- Each card pre-programmed with a unique ID number, first 10 digitals are printed on the card
- Compatible with other universal 125kHz tags like EM4100/4102, Suitable for 125kHz ID proximity access control system and ID management system
|
|
|
|
|---|---|---|
Fingerprint Unlock
|
Password Unlock
|
Swipe Unlock
|
|
|
|
|
|---|---|---|
Backlight Keypad, LEDs statusAccess control keypad touch panel, 3-colour LEDs display the working status, blue backlight features keys. Embedded 0.5mm micro frame design, full of sense of technology. |
Metal Case, WeatherproofAll metal case, Wear resistance, Weatherproof. |
Zinc Alloy Case, Anti-prying, Anti-vandalAccess control case with strong zinc alloy electroplated impact resistance, anti-vandal . Anti-prying hexagonal star screw, Include Wrench. |
Wring diagram
IMPORTANT NOTE:
IMPORTANT NOTE:
- For garage door/sliding door openers, please make sure your garage door openers is compatible with the keypad.
- If the garage door opener has a wired wall push button wiring port, supports run by wired wall push button, then it’s compatible with the keypad.
- The wired keypad can be used with most third party garage door/gate openers or swing/sliding door openers, whose control board accepts “normally open dry contact” signal, powered by the openers control board or powered by an external DC 12V-24V power supply control.
Install:
- Remove the back cover from the keypad using the supplied special screw driver
- Drill 2 holes on the wall for the Self tapping screws and 1 hole for the cable
- Put the supplied rubber bungs into the 2 holes
- Fix the back cover firmly on the wall with 2 Self tapping screws
- Thread the cable through the cable hole
- Attach the keypad to the back cover
Please note that “exit button”, “electric lock”, “DC 12V power supply” are not included in this package, please kindly refer to our store for all available accessories for Access Control.
Package includes:
- 1 x Metal Fingerprint Access Control
- 5 x 125kHz ID Keyfobs
- 1 x Screw Package (Include Wrench)
- 1 x User Manual(english)